Front Panel Switches & Indicators Headers - Abit NF-95 Installation Manual

2.4.2 Front Panel Switches & Indicators Headers
This header is used for connecting switches and LED indicators on the chassis front panel.
Watch the power LED pin position and orientation. The mark "+" align to the pin in the figure
below stands for positive polarity for the LED connection. Please pay attention to connect these
headers. A wrong orientation will only cause the LED not lighting, but a wrong connection of
the switches could cause system malfunction.
Pin Definition
1 HD LED +
3 HD LED -
5 RESET
7 RESET
9 Reserved
2-6
Pin Definition
2 MSG LED +
4 MSG LED -
6 Power Switch
8 Power Switch
NF-95