Hookflash Signal To Trunk - Fujitsu F9600 User Manual

• Program Mode: Explains the methods for:
- Assigning features to specific buttons on your Digital
Telephones.
- Changing features at your Digital Telephones.
- Displaying features or functions on your Digital Telephones.
• Program Mode/Operating Procedures: Details the specific
instructions for assigning each feature.
• Display Features: Describes the various types of displays with
definitions.
• Definitions: Clarifies any unfamiliar terminology used in this
guide.
• System Tones: Details the various tones heard while using your
telephone.
Convenient tables are included at the end of this guide that briefly
explain line status LED (lamp) indications, and ringing patterns (Tables
4 and 5). Table 6 provides a place for you to record feature codes
specific to your system. There are also customized lists for you to
record paging and code call zones.

Hookflash Signal to Trunk

The Hookflash Signal to Trunk feature enables an extension user to
send a hookflash signal to a CO trunk or remote PBX in order to use
the features associated with that outside source. When this feature is
activated in your system, replace all references to the FLASH button
with the TRANSFER button. Only when this feature is in service will
this change be necessary. Contact your System Administrator to
determine whether or not this feature has been implemented.
2