4
Save the zip file in the root directory of
your USB flash drive.
5
Use the archive utility to extract the
software update file in the root directory.
» The files are extracted under the
UPG_ALL folder of your USB flash
drive.
6
Disconnect the USB flash drive from your
computer.
Step 2: Update the software
Caution
•
Do not switch off the home theater or remove the
USB flash drive during the update.
1
Connect the USB flash drive containing the
downloaded file to your home theater.
•
Make sure that the disc compartment
is closed and no disc inside.
2
Press
(Home).
3
Select [Setup], and then press OK.
4
Select [Advanced] > [Software Update]
> [USB].
5
Follow the onscreen instructions to
confirm the update.
» Once complete, the home theater
automatically switches off . If it does
not, disconnect the power cord for a
few seconds and then reconnect it.
EN
28