International Certification; North American Certifications; Power Supply/Charger Certification; Declaration Of Conformity/Approvals - Emerson 475 User Manual

International Certification

North American
Certifications
POWER
SUPPLY/CHARGER
CERTIFICATION
Declaration of
Conformity/Approvals

LABEL DRAWINGS

Figure B-1. All 475 Field Communicators have a similar label to the one below.
IECEx
Certification No.: IECEx BVS 09.0012
Ex ia IIC T4 (-10°C ≤ Ta ≤ +50°C)
Factory Mutual (FM)
Intrinsically Safe for Class I, Division 1, Groups A, B, C, and D and Class I, Zone 0,
AEx ia IIC T4 (Ta = 50°C) hazardous locations when connected as indicated in the
control drawing 00475-1130. See the control drawing for input and output parameters.
Canadian Standards Association (CSA)
Intrinsically Safe for use in Class I, Zone 0, Ex ia IIC T4 (Ta = 50°C) hazardous
locations when connected as indicated in the control drawing 00475-1130. See the
control drawing for input and output parameters. Please note the parameters in the
control drawing are the same as the FM parameters.
The 475 Field Communicator power supply/charger complies to the requirements of
the relevant EU directives. The conformity assessment process has been successfully
completed as per the directives listed below. All approval information for this product
can be accessed at www.fieldcommunicator.com.
European Union Directives
Low Voltage Directive 2006/95/EC
EN 60950: 2001 + A11
EMC Directive 2004/108/EC
The following harmonized standards were applied, immunity EN61204-3:2000
RoHS (2002/95/EC) directive
WEEE (2002/96/EC) directive
Japanese Directives
DENAN/PSE
Label 1-1
ZN:2009 08 50 0
44.0mm
475 Field Communicator
Emerson Process Management
Distribution Ltd
LE19 1UX Leicester, UK
Model 475
Serial No. 1 2 3 4 5 6 7 8
Barcode
1180
Use only with 475 Power Module
2009
R = 1.5 mm
B-3