Mitsubishi 4G6 Manual page 106

11C-36
Dynamic damper
Engine
mount
stopper
Engine mount bracket
ENGINE <4D6> -
INSTALLATION SERVICE POINTS
"AA ENGINE ASSEMBLY INSTALLATION
Install the engine assembly, checking that the cables, hoses,
and harness connectors are not clamped.
"BA ENGINE MOUNT STOPPER INSTALLATION
Engine side
Clamp the engine mount stopper so that the arrow points
in the direction as shown in the diagram.
Arrow
"CA ENGINE MOUNT BRACKET INSTALLATION
1. Place a garage jack against the engine oil pan with a
2. Support the engine with the garage jack.
3. Remove the chain block and support the engine assembly
Engine Assembly
piece of wood in between, and install the engine mount
bracket while adjusting the position of the engine.
with the special tool.