Sanyo XHX1252 Instruction Manual page 11

Wireless remote
control unit
address displays
X type * The address switch
Position of in the operation
address switch on area may be set to
signal receiver any position.
(inside indoor unit)
T type * The address switch
Position of in the operation
address switch on area may be set to
signal receiver any position.
(inside indoor unit)
K type * The address switch
Position of in the operation
address switch area may be set to
inside indoor unit any position.
A, U, D type * The address switch
Position of in the operation
address switch in area may be set to
signal receiver any position.
OI-837-11-EG
Address Settings (continued)
......
For positions 1, 2 and 3, set the
knob to the left; conversely, for 4, 5
and 6, set the knob to the right.
......
For positions 1, 2 and 3, set the
knob to the left; conversely, for 4, 5
and 6, set the knob to the right.
......
......
For positions 1, 2 and 3,set the
knob upward (1); conversely, for 4,
5 and 6, set the knob downward
(ON).
For positions 1, 2 and 3, set the
knob to the left; conversely, for 4, 5
and 6, set the knob to the right.
......
11