Table of Contents
Advertisement
b.
If you are removing a PCI Express x1 card, hold the card at each end and carefully rock it
back and forth until the connectors pull free from the socket. Be sure not to scrape the card
against the other components.
c.
If you are removing a PCI Express x16 card, pull the retention arm on the back of the
expansion socket away from the card and carefully rock the card back and forth until the
connectors pull free from the socket. Be sure not to scrape the card against the other
components.
6.
Store the removed card in anti-static packaging.
7.
If you are not installing a new expansion card, install an expansion slot cover to close the open
slot.
CAUTION:
expansion slot cover for proper cooling of internal components during operation.
60
Chapter 7 Removal and Replacement Procedures – Microtower Chassis
After removing an expansion card, you must replace it with a new card or
- Quick Links:
- Microtower Components
Hide quick links:
Advertisement
Table of Contents
