Power Switch
Description
Power switch/LED assembly
The power switch is attached to the front of the chassis using tabs (no screws). Its cable routes
through metal tabs in the chassis floor. The power switch cable connects to the front USB assembly
cable.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
From the inside of the computer, remove the power switch cable from the tabs on the computer
floor.
(Preparation for Disassembly on page
(Access Panel on page
(Front Bezel on page
90).
88).
Spare part number
656984-001
87).
Power Switch 109