Making A Copy; Copying - Panasonic NV-FJ600 Series Operating Instructions Manual

Making a Copy

Copying

This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of previous one.
Recording VCR
AV2 (AUDIO IN / VIDEO IN
POWER Í/I
2PULL-OPEN
DIRECT REC
Other VCR or
Video movie camera
Preparations
¡ Connect a video movie camera or another VCR to this VCR
as shown.
≥ Display the VCR picture on the TV.
¡ Insert the cassette on which the copying is to be
performed, and make sure that its erasure prevention tab is
not broken out.
¡ Select the audio source required by pressing the INPUT
SELECT button to set A1 or A2.
A1: Through the AV1 (AUDIO IN/VIDEO IN) sockets.
A2: Through the AV2 (AUDIO IN/VIDEO IN) sockets on
front panel.
≥ Use the L and R connectors for operations in the
normal (monaural) mode.
POWER Í/I
2PULL-OPEN
Other Monaural VCR or
Video movie camera
AV1 (AUDIO IN / VIDEO IN
)
IN (AV1) OUT
IN
VIDEO
L RF
AUDIO
R OUT
DIRECT REC
(Not supplied)
Operations
1 Press the Play button
2 At the point where you want to join a new scene, press
the Pause/Slow button
mode.
3 Press the REC button
)
mode.
4 Start playback on the source unit and search for the
point from which you want to record (copy) onto this
VCR.
5 When that point is reached, press the Pause/Slow
button again to start recording the new picture and
sound from the playback unit.
6 To record (copy) additional scenes, press the Pause/
Slow button to put this VCR in the recording pause
mode and then perform above steps 4 and 5 again.
7 At the point where you want to stop recording, press the
Stop button to finish recording.
Hint:
≥ The new sound is recorded on both the Hi-Fi audio tracks
and the normal audio track. The sound recorded on the
normal audio track is always in mono.
Notes:
≥ If you leave the VCR in the recording pause mode for more
than 5 minutes in step 3 or 6, the VCR automatically
switches over to the stop mode to protect the video heads.
¡ If "DIRECT REC" is set to "ON", connect with AV2 sockets
and select A2.
to start playback.
to put it in the still playback
to put it in the recording pause
29