ZyXEL Communications P-794H Quick Start Manual page 10

8 wire g.shdsl cpe with 4 port lan

Hide thumbs Also See for P-794H:

CPE Mode

Log into the P-794H you are using as the CPE. Click SHDSL > SHDSL

Configuration and select CPE in the Unit ID field. Make sure the other

settings on this screen are the same as SHDSL settings of CO. Click

Apply.

1. Connect the DSL ports of the CO to the DSL ports of the CPE with the

provided telephone wires. The DSL lights will be blinking. Wait for 1-2

minutes as the P-794Hs establish the connection. The DSL lights will

stop blinking once the connection is successful.

2. To test the connection, you can ping the CPE from the CO or the

other way around. If there is response, the connection is ready. If

there is no response, check your DSL connections and also see if the

SHDSL screen settings of the CPE are the same as the CO's.

Table of Contents