GE S2100 Owner's Manual page 13

About cycle options.
Appearance may vary
About other features.
SIGNAL
Alerts you when the cycle is complete.
On some models, press SIGNAL to turn the beeper on or off.
On some models, press SIGNAL to select low or high volume, or to turn the beeper off.
2ND RINSE
Adds a second rinse to any cycle.
EXTENDED SPIN
Extends the last spin of a wash cycle. This will extract more water from your clothes.
Clothes will be drier when you use this option.
DELAY 1-8 HOURS (on some models)
Use to delay the start of your washer for 1 to 8 hours. First choose your wash cycle and
any options. Then press this pad for the number of hours you want to delay the cycle.
Press the START pad to start the countdown.
The countdown time will be shown in the Est. Time Remaining display.
Cycle Status Indicator Lights
The cycle status indicator lights display what part of the cycle the washer is in.
PerfecTemp Plus
PerfecTemp Plus senses the incoming water temperature and adjusts the temperature
of the fill water.
The lid must be closed for PerfecTemp Plus to work.
If your water is too cold, detergent will not dissolve effectively and clothes may not
get clean. If the water is too hot, fabrics could be damaged.
PerfecTemp Plus adjusts these water temperature extremes for better washing
performance.
You may hear the water valves turning off and on while the water temperature is being
adjusted. This is normal.
Some models have an indicator light that tells you when PerfecTemp Plus is active.
Auto Balance (on some models)
The Auto Balance feature senses the wash load distribution for an even spin. Models
with Auto Balance have an indicator light that tells you when the feature is active.
ge.com
13