Features - GE Profile SmartDispense SPBD880 Owners And Installation Manual

About the SmartDispense
SmartDispense
2
The SmartDispense feature allows you to set your liquid
HE (High Efficiency) detergent and/or softener dispensing
preferences for your load. This feature can be used with
™ pedestal features.
To use SmartDispense:
1. Select your desired Wash Cycle.
2. Press the SMART DISPENSE button
(button will light up when it is on).
3. Use the left and right arrows to select
which tank your liquid HE (High Efficiency)
detergent is located in (or choose "off" if
you do not want to dispense detergent).
4. Press ENTER to select liquid HE
(High Efficiency) detergent container.
5. Use the left and right arrows to select
liquid HE (High Efficiency) detergent
concentration (located on your liquid
HE [High Efficiency] detergent bottle).
6. Press ENTER to select detergent
concentration.
7. Use the left and right arrows
to select how much liquid HE
(High Efficiency) detergent you
would like to dispense ("Norm"
corresponds to a standard dose).
NOTE: When you use SmartDispense, it will
automatically distribute detergent and fabric
softener according to the soil level, water
hardness and load size detected.
8. Press ENTER to select liquid HE
(High Efficiency) detergent dispense level.
9. Use the left and right arrows
to select whether you would like
to use fabric softener.
10. Press ENTER to select softener.
11. Use the left and right arrows to select how
much softener you would like to dispense
("Norm" corresponds to a standard dose).
12. Press ENTER to select softener dispense
level.
13. The screen will show SMART DISPENSE ON.
14. Press START to start the cycle.
15. During your wash cycle, the display will
show the current status and options for
SmartDispense.
NOTE: To turn off SmartDispense, press
SMART DISPENSE again; to select different
dispense options, press SMART DISPENSE
twice.
any wash cycle, except for Rinse & Spin, Drain & Spin and
Washer Cleaning cycles.
ge.com
5