Light Bulb Replacement - Dimplex DFB4047 Owner's Manual

Maintenance

Light Bulb Replacement

Light bulbs need to be replaced
when you notice a dark section
of the flame. There are two (2)
bulbs under the log set which
generate the flames and embers.
Light Bulb Requirements
Quantity of two clear chandelier
or candelabra bulbs with an E-12
Figure 6
Figure 7
Front
glass
Glass
clips
Light
assembly
Log set
(small) socket base, 60 Watt rat-
ing. Example: GE 60BC or Philips
60CTC. Do not exceed 60 Watts
per bulb.
Replacement:
CAUTION: Allow at least 10
minutes for light bulbs and heater
to cool off before touching bulbs
to avoid accidental burning of
skin.
1. Remove the front glass by
removing the 2 outer screws
holding the glass clips
5).
2. Remove the log grate by
removing the 2 mounting
screws (Figure
3. Remove the log set by lifting
Log grate
(Figure
6).
Light bulbs
13