The Pre Out Setting; The Input Assign Menu; The Auto Power Down Menu; The Fl Demo Mode Menu - Pioneer VSX-S300-k Operating Instrctions

06 The Home Menu
06

The Pre Out Setting

Specify either using the surround back speaker or the front
height speaker connection with the PRE OUT SURR BACK/
FRONT HEIGHT outputs. An additional amplifier is required
for the speaker connection.
• Default setting: Surr. Back
1
Select 'Pre Out Setting' from the Home Menu.
Home Menu
3.Pre Out Setting
1 . Auto MCACC Pre Out
2 . Manual SP Setup
3 . Pre Out Setting
4 . Input Assign
5 . HDMI Setup
6 . Auto Power Down
7 . FL Demo Mode
2
Select which speaker to connect to the PRE OUT SURR
BACK/FRONT HEIGHT outputs using /.
• Surr. Back – Connect the surround back speaker.
• Height – Connect the front height speaker.
3
When you're finished, press RETURN.
You return to the Home Menu.
30
En

The Input Assign menu

The composite video input terminal is assigned to ANALOG
AUX under factory settings, but this can be changed to
DIGITAL AUX or CD input.
1
Select 'Input Assign' from the Home Menu.
Home Menu
Surr. Back
2
Select 'Composite Input' from the Input Assign menu.
Return
4.Input Assign
a.Composite Input
3
Select the desired input option for the composite video
input terminal.
Select between ANALOG AUX, DIGITAL AUX, CD or OFF.
• Use / and ENTER to do this.
• Make sure you have connected the audio from the
component to the corresponding inputs on the rear of the
receiver.
4
When you're finished, press RETURN.
You return to the Input Assign menu.
1 . Auto MCACC
2 . Manual SP Setup
3 . Pre Out Setting
4 . Input Assign
5 . HDMI Setup
6 . Auto Power Down
7 . FL Demo Mode
4a.Composite Input
I n p u t ANALOG AUX
Return Return

The Auto Power Down menu

Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours).
• Default setting: 6H
1
Select 'Auto Power Down' from the Home Menu.
Home Menu
6.Auto Power Down
1 . Auto MCACC
2 . Manual SP Setup
3 . Pre Out Setting
4 . Input Assign
5 . HDMI Setup
6 . Auto Power Down
7 . FL Demo Mode
2
Specify the amount of time to allow before the power
is turned off (when there has been no operation).
• You can select 2, 4 or 6 hours, or OFF (if no automatic
shutoff is desired).
3
When you're finished, press RETURN.
You return to the Home Menu.

The FL Demo Mode menu

Set whether or not various demos are to be shown on the
front panel display.
1
Select 'FL Demo Mode' from the Home Menu.
Home Menu 7.FL Demo Mode
1 . Auto MCACC FL Demo
2 . Manual SP Setup
3 . Pre Out Setting
4 . Input Assign
5 . HDMI Setup
6 . Auto Power Down
7 . FL Demo Mode
2
Choose ON or OFF for the demo display.
3
When you're finished, press RETURN.
You return to the Home Menu.
6H
Return
ON
Return