Connecting Your Component With No Hdmi Terminal; Connecting Optional Bluetooth ® Adapter; Connecting Antennas - Pioneer VSX-S300-k Operating Instrctions

02 Connecting your equipment
02
Connecting your component with no HDMI
terminal
This diagram shows connections of a TV and DVD player (or
other playback component) with no HDMI terminal to the
receiver.
Note
• When using a digital cable for DVD player audio input,
change the Composite Input setting to CD (Coaxial) or
DIGITAL AUX (Optical) via the Input Assign menu (see
The Input Assign menu on page 30).
DVD player
ANALOG
AUDIO OUT
L
VIDEO OUT
DVR IN BD/BDR IN GAME IN
HDMI
VIDEO ( ANALOG ANALOG
AUX )
ASSIGNABLE
IN
PUT 5 V
A MAX )
MONITOR
OUT
PTER PORT
VIDEO IN
TV
This connection is required in order to
listen to the sound of the TV over the
receiver.
14
En
Connecting optional Bluetooth
When the Bluetooth ADAPTER (Pioneer Model No. AS-BT100
or AS-BT200) is connected to this unit, a product equipped
with Bluetooth wireless technology (portable cell phone,
digital music player, etc.) can be used to listen to music
wirelessly.
 Connect a
terminal on the rear panel.
• For instructions on playing the Bluetooth wireless
technology device, see Pairing the Bluetooth ADAPTER
and Bluetooth wireless technology device on page 19.
Select one
Important
DIGITAL AUDIO OUT
COAXIAL OPTICAL
R • Do not move the receiver with the Bluetooth ADAPTER
connected. Doing so could cause damage or faulty
contact.
FM
UNBAL
OUT COAXIAL 75
OPTICAL
CD IN TV IN DIGITAL AUX IN
SURR BACK/ AUDIO
AUX FRONT HEIGHT
L
(Single)
R
SUBWOOFER
IN
PRE OUT
OPTICAL
DIGITAL AUDIO OUT
®
ADAPTER
Bluetooth ADAPTER to the ADAPTER PORT
STB IN DVD/DVR IN BD/BDR IN GAME IN
HDMI
VIDEO ( ANALOG
ASSIGNABLE
IN
( OUTPUT 5 V
0.1 A MAX )
AM LOOP
MONITOR
OUT
ANTENNA ADAPTER PORT
®
Bluetooth ADAPTER

Connecting antennas

Connect the AM loop antenna and the FM wire antenna as
shown below. To improve reception and sound quality,
connect external antennas (see Using external antennas
below).
fig. a
4
FM
UNBAL
75
AM LOOP
ANTENNA
A
AUX )
1
1
Push open the tabs, then insert one wire fully into each
terminal, then release the tabs to secure the AM antenna
wires.
2
Fix the AM loop antenna to the attached stand.
To fix the stand to the antenna, bend in the direction
indicated by the arrow (fig. a) then clip the loop onto the
stand (fig. b).
3
Place the AM antenna on a flat surface and in a direction
giving the best reception.
4
Connect the FM wire antenna into the FM antenna
socket.
For best results, extend the FM antenna fully and fix to a wall
or door frame. Don't drape loosely or leave coiled up.
fig. b
2
3