Installation Using The Screw Holes On The Side Of The Unit - Pioneer AVH-2350DVD Owner's Manual

Section
12 Installation
3 Attach the trim ring.
1 Trim ring
(Supplied with this unit)
Installation using the screw
holes on the side of the unit
For Middle East Asian and South African
models
1 Remove the side brackets.
1 Side bracket
(Supplied with this unit)
2 Screw for fixing the side bracket
(5 mm × 9 mm)
(Supplied with this unit)
# for Middle East Asian and South African mod-
els
56
En
1
1
2 Fastening the unit to the factory radio-
mounting bracket.
Position the unit so that its screw holes are
aligned with the screw holes of the bracket,
and tighten the screws at 3 or 4 locations on
each side.
3
4
2
1 If the pawl gets in the way, bend it down.
2 Factory radio mounting bracket
3 Use either truss (5 mm × 8 mm) or flush
surface (5 mm × 9 mm) screws, depending
on the bracket screw holes.
4 Frame
In some types of vehicles, discrepancy may
occur between the unit and the dashboard.
If this happens, use the supplied frame to
fill the gap.
5 Dashboard or console
1
2
5