Table of Contents
Advertisement
M38ODV-ST Direct Vented Fireplace
Installation
Lighting Instructions
See Pages 12.
Burner Adjustment
The M38ODV-ST is equipped with an adjustable burner, allowing you
to raise or lower the flames. To adjust the flames, locate the black knob
marked 'Hi-Lo', in the centre of the gas control valve (See Figure 15).
The front burners are not adjustable.
To raise the flame height, turn the black knob (located behind the
lower trim) counterclockwise.
To lower the flame height, turn clockwise.
Figure 15. Hi-Lo' Adjustment on the M38ODV-ST gas valve.
Page 10
Operation
XG0128
Advertisement
Table of Contents
