Operation And Important Riding Points; Starting A Cold Engine - Yamaha BWS CW50 Owner's Manual

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.

OPERATION AND IMPORTANT RIDING POINTS

EAU15951

Starting a cold engine

NOTICE
See page 5-4 for engine break-in in-
structions prior to operating the ve-
EWA10271 hicle for the first time.
1. Turn the key to " ", and when the
oil level warning light comes on,
turn the key to "
NOTICE
If the oil level warning light does not
come on, have a Yamaha dealer
check the electrical circuit.
PUSH
ZAUM0253
2. Close the throttle completely.
EAU16566 3. While applying the front or rear
ECA10250
".
ECA10240
ZAUM0367
5-1
brake, start the engine by pushing
the start switch or by pushing the
kickstarter lever down.
If the engine fails to start by push-
ing the start switch, release the
switch, wait a few seconds, and
then try again. Each starting at-
tempt should be as short as possi-
ble to preserve the battery. Do not
crank the engine more than 5 sec-
onds on any one attempt. If the en-
gine does not start with the starter
motor, try using the kickstarter.
5