Indicator Lights And Warning Lights - Yamaha BWS CW50 Owner's Manual

Indicator lights and warning
lights
CW50/CW50L
1
4
ZAUM0554
1. Left turn signal indicator light "
2. Right turn signal indicator light "
3. High beam indicator light "
4. Oil level warning light " "
INSTRUMENT AND CONTROL FUNCTIONS
EAU49392 CW50N
1
2
ZAUM0962
1. High beam indicator light "
2. Turn signal indicator light "
3. Fuel level warning light "
3
4. Oil level warning light "
"
"
" Turn signal indicator lights "
and " " (CW50/CW50L)
The corresponding indicator light flash-
es when the turn signal switch is
pushed to the left or right.
Turn signal indicator light "
(CW50N)
This indicator light flashes when the
turn signal switch is pushed to the left or
right.
High beam indicator light "
This indicator light comes on when the
2
high beam of the headlight is switched
on.
3
Oil level warning light "
4
This warning light comes on when the
key is in the " " position or if the oil lev-
el in the 2-stroke engine oil tank is low
during operation. If the warning light
"
" comes on during operation, stop imme-
"
diately and fill the oil tank with Ya-
"
malube 2 or equivalent 2-stroke engine
oil of either JASO grade "FC" or ISO
EAU11030
grades "EG-C" or "EG-D". The warning
"
light should go off after the 2-stroke en-
gine oil tank has been refilled.
TIP
If the warning light does not come on
when the key is in the " " position or
EAU11020
does not go off after the 2-stroke en-
"
gine oil tank has been refilled, have a
Yamaha dealer check the electrical cir-
cuit.
3-2
EAU11080
"
EAU11181
"
3