Ambient Temperature Display - Yamaha XMAX YP250R Owner's Manual

Hide thumbs Also See for XMAX YP250R:
Table of Contents

Advertisement

Ambient temperature display

1. Frost warning indicator "
2. Minus item
3. Temperature
This display shows the ambient tem-
perature from -30 °C ( -86 °F) to 50 °C
(122 °F).
The frost warning indicator "
automatically comes on if the tempe-
rature is lower than 3 °C (37.4 °F).
INSTRUMENT AND CONTROL FUNCTIONS
Oil change indicator "OIL"
1
ZAUM0582
"
1. Oil change indicator "OIL"
The engine oil should be changed
when this indicator comes on. The
indicator stays on until it is reset. After
changing the engine oil, reset the indi-
cator as follows.
"
1. While holding the "MODE" and
"SET" buttons pushed, turn the
key to " ON ".
2. Continue holding the "MODE"
and "SET" buttons pushed for
two to five seconds.
3. Release the buttons and the oil
change indicator will go off.
TIP
3-8
The oil change indicator will
come on at the initial 1000 km
(600 mi) and every 3000 km
(4800 mi) thereafter.
If the engine oil is changed befo-
re the oil change indicator comes
on (i.e. before the periodic oil
change interval has been rea-
ched), the indicator must be reset
after the oil change for the next
periodic oil change to be indica-
ted at the correct time. After
resetting, the indicator will come
on for two seconds. If the indica-
tor does not come on, repeat the
procedure.
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xmax 250i

Table of Contents