Yamaha VITY XC125E Owner's Manual page 47

be operated without the air filter
element installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively
[ECA10481]
5. Install the air filter case cover by in-
stalling the screws.
Cleaning the air filter check hoses
1. Air filter check hose
2. Clamp
3. Air filter check hose plug
1. Check the hoses on the rear side
of the air filter case for accumulat-
ed dirt or water.
2. If dirt or water is visible in the air fil-
ter check hoses, remove the
clamps from them, and then re-
move the plugs to drain the hoses.
PERIODIC MAINTENANCE AND ADJUSTMENT
Cleaning the V-belt case air filter el-
ement
1. Place the scooter on the center-
worn. stand.
2. Remove the screws, and then pull
the V-belt case air filter element
cover outward and away from V-
belt case.
1
2
1
2
3
1. V-belt case air filter element cover
2. Screw
3. Remove the V-belt case air filter
element holder by removing the
screw.
1. V-belt case air filter element holder
2. Screw
4. Pull the V-belt case air filter ele-
6-13
1
2
ment out, and then clean it with
solvent. After cleaning, remove the
remaining solvent by squeezing
the element. WARNING! Use
only a dedicated parts cleaning
solvent. To avoid the risk of fire
or explosion, do not use gaso-
line or solvents with a low flash
point. NOTICE: To avoid
[EWA10431]
damaging the air filter element,
handle it gently and carefully,
and do not twist it.
[ECA10521]
6