Changing The Brake Fluid; Checking And Lubricating The Cables - Yamaha VITY XC125E Owner's Manual

Hide thumbs Also See for VITY XC125E:
Table of Contents

Advertisement

G
Brake fluid may deteriorate paint-
ed surfaces or plastic parts. Al-
ways
clean
up
spilled
immediately.
G
As the brake pads wear, it is nor-
mal for the brake fluid level to grad-
ually go down. However, if the
brake fluid level goes down sud-
denly, have a Yamaha dealer
check the cause.
PERIODIC MAINTENANCE AND MINOR REPAIR

Changing the brake fluid

Have a Yamaha dealer change the
fluid
brake fluid at the intervals specified in
the NOTE after the periodic mainte-
nance and lubrication chart. In addition,
have the oil seals of the brake master
cylinder and caliper as well as the
brake hose replaced at the intervals
listed below or whenever they are dam-
aged or leaking.
G
Oil seals: Replace every two
years.
G
Brake hose: Replace every four
years.
6-20
EAU22720
Checking and lubricating the
cables
The operation of all control cables and
the condition of the cables should be
checked before each ride, and the ca-
bles and cable ends should be lubricat-
ed if necessary. If a cable is damaged
or does not move smoothly, have a
Yamaha dealer check or replace it.
Recommended lubricant:
Engine oil
WARNING
Damage to the outer sheath may in-
terfere with proper cable operation
and will cause the inner cable to
rust. Replace a damaged cable as
soon as possible to prevent unsafe
conditions.
EAU23100
EWA10720
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents