Yamaha VITY XC125E Owner's Manual page 49

3. Remove the V-belt case air filter
element holder by removing the
screw.
1
2
1. V-belt case air filter element holder
2. Screw
4. Pull the V-belt case air filter ele-
ment out, and then clean it with
solvent. After cleaning, remove the
remaining solvent by squeezing
the element.
WARNING
Use only a dedicated parts cleaning
solvent. To avoid the risk of fire or
explosion, do not use gasoline or
solvents with a low flash point.
PERIODIC MAINTENANCE AND MINOR REPAIR
CAUTION:
To avoid damaging the air filter ele-
ment, handle it gently and carefully,
and do not twist it.
1
1. V-belt case air filter element
5. Apply oil of the recommended type
to the entire surface of the sponge
material, and then squeeze the ex-
cess oil out.
EWA10430
NOTE:
The air filter element should be wet but
not dripping.
Recommended oil:
Yamaha foam air filter oil or other
quality foam air filter oil
ECA10520 6. Insert the element into the V-belt
7. Install the air filter element holder
8. Install the air filter element cover
6-14
case.
by installing the screw.
by installing the screws.
6