Intermec 730 User Manual page 157

700 Series Color Mobile Computer User's Manual
Using Sprint Watcher
Before you start using the Sprint Watcher application, make sure you
match the correct ESN with each 760 Computer and that you have at least
80% CDMA signal strength.
The ESN that you give to your provider is either on the box or on a label
inside the battery compartment. The label would include the "ESN" term
and a bar code along with the serial number.
1 Tap Start > Programs > the Watcher icon or tap the Watcher icon from
the NDISTRAY via the Today screen (circled in the following illustra-
tion) to launch the SB555 Watcher program.
2 If your 760 Computer was not previously activated, Watcher automati-
cally starts the Activation Wizard. Otherwise, select Manual Activation
to continue.
Chapter 4 — Network Support
139