Pioneer DVR-550H-K Operating Instructions Manual page 114

The Initial Setup menu
15
Setting
Tuner
Auto Channel
Setting
Manual CH Setting
Channel Swapping
114
En
Options Explanation
Auto Scan Select your country and then wait for the recorder to
auto tune into channels in your area. After auto scan
has finished, the channel mapping screen appears
showing which channels have been assigned to
which programme numbers. You can skip unwanted
channels using the Manual CH Setting option below.
Press HOME MENU to exit the channel mapping
screen.
Download from
If your TV supports this feature you can download all
TV
the channels that your TV is tuned to via the SCART
input. Select your country and then wait for the
download to complete. After the download is
complete, the channel mapping screen appears, as
above.
See also the operating instructions that came with
your TV for more information.
Next Screen Proceed to the next screen if you need to adjust any
of the settings made by auto tuning. Select your
country, then proceed to the manual channel setting
screen:
• Change channel presets using the
NEXT buttons.
• To skip the displayed channel (because there is no
station assigned to that channel), change the Skip
setting to On.
• Set the CH SYSTEM setting to match the channel
system of your country or region.
• Set the CHANNEL setting to the channel you want
to assign to the current channel preset.
• To manually fine tune the channel, change the AFT
setting to Off then adjust the Level setting.
• Set the Sound System setting to match the sound
system of your region.
• The Name field allows you to input a name of up to
five characters for the current channel preset.
• If the currently selected channel is scrambled
requiring a decoder connected to the AV2 (INPUT 1/
DECODER), set the Decoder setting to On.
Next Screen
Proceed to the next screen to swap channel
assignments of different presets so that you can
group together presets that naturally go together.
Select two presets to swap then press ENTER.
PREV