Setting Up The Anynet+(Hdmi-Cec) - Samsung DVD-H1080 Manuel D'utilisation

Setting Up the Anynet+(HdMI-CeC)

Anynet+ is a function that can be used to operate this DVD Player using a Samsung TV
remote control. This is done by connecting the DVD player to a SAMSUNG TV using an HDMI
Cable. (see pages 12-13) This is only available with SAMSUNG TVs that support Anynet+.
To operate Anynet+, you must turn Anynet+(HDMI-CEC) On in the Setup Menu.
1
Press the MenU button.

Press the √/® buttons
to select HdMI Page,
then press the † or
enter button.

Press the π/† buttons
to select Anynet+(HdMI-
CeC), then press the ®
or enter button.

Set the Anynet+(HDMI-
CEC) to "On"on your DVD
Player., then press the ®
or enter button.

Set the Anynet+ function on
your Samsung TV. (See your
TV instruction manual for
more information.).
• When you press Anynet+
button on the TV remote
control, the OSD to the right
will appear.
-- HDMI Page --
HDMI Auto
Anynet +(HDMI-CEC) On
Picture Quality
BD Wise Off
-- HDMI Page --
HDMI Auto
Anynet +(HDMI-CEC) On
Picture Quality
BD Wise Off
-- HDMI Page --
HDMI Auto
Anynet +(HDMI-CEC) On
On
Picture Quality Off
BD Wise Off
DVP
View TV Vi ew TV ® ®
Select Device ®
Record
®
Menu on Device ®
Device Operation ®
Receiver : Off ®
Setup ®
ENTER
Move
Exit
tV Menu
To make the setup menu disappear, press the
MENU button.
English _