Samsung DVD-H1080 Manuel D'utilisation page 119

The following describes each option found in the Audio Setup Menu.
❶ Dolby Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital via digital output.
Select Bitstream when connecting to a Dolby Digital Decoder.
❷ MPEG2 Digital Output
- PCM : Converts to PCM (2CH) audio.
- Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or 7.1 CH). Select Bitstream when
using the Digital Audio Output.
note
When playing a disc that has MPEG Audio and bitstream is selected, depending on your AV
receiver,the coaxial Digital Audio jack may not output audio.
❸ Dynamic Compression
- On : To select dynamic compression. This is useful for watching movies late at night, as it
balances the loud and quiet portions of a disc.
- Off : To select the standard range.
❹ PCM Down Sampling
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case,
all signals will be output without any changes.
Power Music On
❺
- On : To turn On Start up music.
- Off : To turn Off Start up music.
note
Even when PCM Down sampling is Off, some discs will only output down-sampled audio
through the digital outputs.
HdMI
- If your tV is not compatible with compressed multi-channel formats (dolby digital, dtS,
MPeg), you should set digital Audio to PCM.
- If your tV is not compatible with LPCM sampling rates over 48kHz, you should set PCM
down sampling to On.
note
• To make the Setup menu disappear, press the MENU button.
• There is no analog audio output when you play a DTS disc.
You must make a Digital audio connection Coaxial.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
English _1