Communications Manager User Options Webpage; Accessing Speed Dial And Other User Settings - Cisco 9951 User Manual

3. Select Cisco Unified Video Camera > Brightness.
4. Select Brightness.
 To increase brightness, press the up arrow on the Navigation pad.
 To decrease brightness, press the down arrow on the Navigation pad.
5. Press Save to set the brightness, or press Exit to return to the
Setup screen.

Communications Manager User Options Webpage

The remainder of this manual discusses the web interface to configure settings on your
phone. To change your speed dial numbers and other user settings you will go to a
configuration web page for your phone. The address of this page is
https://myphone.bgsu.edu/ccmuser
connection to access this site.
Make sure that if you make any changes on this page that you click the "save" button or icon before
ending your session. Once you press save your phone may reboot.

Accessing speed dial and other user settings

You will be prompted for your User ID and Password. Your username and password is
the same username and password you use to log in to your computer each day.
Once you are logged in you will see a screen similar to the one below.
NOTE: Off Campus users must use a VPN