Epson Disc Producer PP-100 User Manual page 28

The Properties screen appears.
4
Set Stacker Settings, Drive Settings (only for PP-100/PP-50), and Printer Settings (only
for PP-100/PP-50).
See EPSON Total Disc Utility Help for details.
 Setting the most suitable publish mode for the usage or number of discs to be
published enables efficient disc publishing. (See
 Setting the Number of Write Retries enables a job to be executed again without job
processing pausing even if an error occurs during writing. The error disc is output to the
output stacker.
 The error mark will not be printed in the following cases.
 The job was cancelled
 An incorrect disc type was found in the input stacker
 Not enough ink was left to print the error mark
Notes
 Fatal error
 For PP-100
Error discs are ejected to:
 Stacker 4 in Standard mode
 Stacker 3 or Stacker 4 in External Output mode
 Stacker 2 or Stacker 3 in Batch mode
 For PP-50
Error discs are ejected to Stacker 3.
 For EPSON Total Disc Utility Help, see
5 Click OK.
28
"Selecting Publish Mode" on page
"EPSON Total Disc Utility Help" on page
56.)
38.