Lights For The Status Of The Product - Epson Disc Producer PP-100 User Manual

Lights for the Status of the Product

This section describes the status of the product using the lights displayed on the control panel.
The status of the product is also indicated by the combination of lights flashing/turning on. See
Errors" on page 110 for details.
PP-100/PP-100AP
Indicator light
Power light
BUSY BUSY light
ERROR ERROR light
INK INK light
Flashing/On
On The power is on.
When only the Power light is on, the product is on
standby for data.
Flashing Product is being initialized.
When it flashes rapidly, it is shutting down
Product is processing a job.
Flashing
For the PP-100 or PP-100AP , when the BUSY light is
flashing rapidly, a disc is being ejected, so do not pull
out Stacker 4. Discs may be damaged.
On The cover, disc transport system, stacker, drive, or
printer is experiencing an error.
Flashing The unit is experiencing a problem.
The ink cartridge has reached its replacement time,
On
the ink cartridge is not correctly installed, or incorrect
ink cartridge is installed.
For information on replacing ink cartridges, see
"Replacing the Ink Cartridge" on page
Flashing The ink is low. Obtain a replacement ink cartridge.
Basic Operations
"Checking Lights for
PP-50
Status
80.
17