Advertisement
Operation Guide 5088
D (+) and B (–) to change the m Day setting.
9.
Use
If you want to change the time setting at this time,
press C and then perform the procedure starting
from step 3 under "To change the current time setting
manually".
10.
After the settings are the way you want, press
return to the Timekeeping Mode.
This will cause the
automatically to 12 o'clock and resume movement
from there.
The day of the week indicated by the
Hand changes automatically in accordance with the
date (year, month, and day).
Note
The watch's built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch's rechargeable battery replaced or after
power drops to Level 3.
Using the Stopwatch
The stopwatch measures elapsed time and split times.
Hand Functions
x Second Hand: Indicates the stopwatch 1/10-second
b Lower Left Dial Hands: Indicate the stopwatch minutes
n Right Dial Hand: Indicates the stopwatch 1/100-second
To perform elapsed time measurement
C to move the n Right Dial Hand to 0.
1.
Use
2.
Now you can perform either of following stopwatch
operations.
To perform an elapsed time operation
B
B
B
Start
Stop
(Restart)
To pause at a split time
B
D
Normal stopwatch hand movement will
resume automatically after fi ve seconds.
Start
Split
Note
The Stopwatch Mode can indicate elapsed time up to 23 minutes, 59.99 seconds.
D button operation (split, reset) is disabled while hands are moving at high speed
following a reset operation and when transitioning from a split time back to normal
elapsed timekeeping.
Once started, stopwatch timing continues until you press
exit the Stopwatch Mode to another mode and even if timing reaches the stopwatch
limit defi ned above.
x Second Hand indicates the 1/10-second count for the fi rst 30 seconds of a
The
stopwatch elapsed time operation. After that, the hand stops at 12 o'clock.
1/10-second timing continues internally after the fi rst 30 seconds, and the
x Second Hand will jump to the current value whenever B (Stop) or D (Split) is
pressed.
n Right Dial Hand is stopped while an elapsed time measurement
Though the
operation is in progress, the watch keeps track of the 1/100-second count
internally. The n Right Dial Hand will jump to the current 1/100-second reading
whenever you stop the stopwatch or perform a split time operation.
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to view the current time in one of 29 time zones
around the globe. The city that is currently selected in the World Time Mode is called
the "World Time City".
Hand Functions
x Second Hand:
Indicates the currently selected World Time City.
b Lower Left Dial Hands:
Indicate the current time in the selected World Time
City in 24-hour format.
n Right Dial Hand:
Indicates the current STD (standard time) or DST
(daylight saving time) setting of the currently selected
time zone.
To view the time in another time zone
C to move the n Right Dial Hand to STD or DST.
1.
Use
x Second Hand will move to the city code of the currently selected World
The
Time City.
D to move the x Second Hand to the city code you want to select as the
2.
Use
World Time City.
b Lower Left Dial Hands will move to the current time in the time zone of
The
the current city code. At this time, the z Hour Hand and c Minute Hand will
continue to indicate the current time in the Home City.
For full information on city codes, see the "City Code Table".
If you think that the time indicated for the selected time zone is not correct, it
probably means that there is something wrong with your Home City settings.
Use the procedure under "To confi gure Home City settings" to correct the Home
City settings.
A to
x Second Hand to move
n Right Dial
count.
and seconds.
count.
B
D
(Stop)
Reset
B
D
Stop
Reset
B to stop it, even if you
To specify standard time or daylight saving time (DST) for a city
1.
In the World Time Mode, use
whose setting you want to change.
Wait until the
move to the time in the currently selected World Time
City. You will not be able to perform step 2 of this
procedure until the hands stop moving.
A for about two seconds until the watch
2.
Hold down
beeps. This will cause the n Right Dial Hand to toggle
between DST (daylight saving time) and STD (standard
time).
Hold down
Note that you cannot switch between
A for two
time)/DST (daylight saving time) while UTC is
seconds
selected as the World Time City.
Note that the
saving time) setting affects only the currently
selected city code. Other city codes are not affected.
Swapping your Home City and World Time City
You can use the procedure below to swap your Home City and World Time City. This
capability can come in handy when you frequently travel between two locations in
different time zones.
The following example shows what happens when the
Home City and World Time City are swapped while the
Home City originally is TYO (Tokyo) and the World Time
City is NYC (New York).
Before
swapping
After
swapping
To swap your Home City and World Time City
1.
In the World Time Mode, use
Time City you want.
In this example, you would move the
to NYC in order to select New York as the World
Time City.
Wait until the
move to the time in the currently selected World Time
City. You will not be able to perform step 2 of this
procedure until the hands stop moving.
B for about three seconds until the watch
2.
Hold down
beeps.
This will make the World Time City (
NYC in this example) your new Home City.
At the same time, it will change the Home City you had selected prior to step 2
(TYO in this example), to your World Time City.
After swapping the Home City and World Time City, the watch will stay in the
World Time Mode. The x Second Hand will point to your new World Time City
(TYO in this example).
b Lower Left Dial Hands will indicate the current time in your new World
The
Time City.
Note
If your current World Time City supports time calibration signal reception, making it
your Home City enables calibration signal reception for that city.
Using the Alarm
When the alarm is turned on, an alarm will sound for about 10 seconds each day
when the time in the Timekeeping Mode reaches the preset alarm time. This is true
even if the watch is not in the Timekeeping Mode.
Hand Functions
x Second Hand:
Indicates the current alarm ON/OFF setting.
b Lower Left Dial Hands:
Indicate the current alarm time setting in 24-hour
format.
n Right Dial Hand: Points to AL.
To change the alarm time setting
C to move the n Right Dial Hand to AL.
1.
Use
D (+) and B (–) to change the alarm time setting.
2.
Use
Each press of either button will move the
D or B will start high-speed hand movement in the applicable
Holding down
direction. To stop high-speed hand movement, press any button.
The alarm always works based on the time kept in the Timekeeping Mode.
The watch will return to the Timekeeping Mode automatically if you do not
perform any operation in the Alarm Mode for about two or three minutes.
To turn the alarm on or off
In the Alarm Mode, press A to toggle the alarm on and off. The x Second Hand will
indicate the current ON/OFF setting.
To stop the alarm
Press any button.
D to select the city code
b Lower Left Dial Hands complete their
STD (standard
STD (standard time)/DST (daylight
Home City
World Time City
Tokyo
New York
10:08 p.m.
9:08 a.m.
(Standard time)
(Daylight saving time)
New York
Tokyo
9:08 a.m.
10:08 p.m.
(Daylight saving time)
(Standard time)
D to select the World
x Second Hand
b Lower Left Dial Hands complete their
b Lower Left Dial Hands one minute.
4
Hide quick links:
Advertisement
