3. Attach the Dry-cell Battery Case Cover to the DT-X7.
Removing
1. Remove the Dry-cell Battery Case Cover from the DT-X7, as shown in the
illustration.
Specifi cations
Power Source:
Output:
Battery Life:
Dimensions:
Weight:
*
under the conditions that backlight's brightness is set to 5th grade and the ratio of cyclic
operation of "Standby, Key input, and Scanning" is set at 10:1:1.
Important!
•
When dry-cell alkaline batteries are used, the following must be noted:
WLAN communication, vibrator, and charging batteries are not operable
Other functional limitations are as follows.
•
CPU speed is set at 104 MHz.
•
Backlight's brightness is reduced to 50%.
E-74
LR03 alkaline batteries × 4pcs
4.7V DC
Approximately 5 hours*
Approximately 37(W) × 56(D) × 23(H) mm
7
⁄
"W × 2
(1
16
Approximately 15g (0.5oz) (not including dry-cell batteries)
3
7
⁄
"D ×
⁄
"H)
16
8