Key Positions; Switch Off The Engine - Volvo XC60 Quick Manual

SwitCh off the engine and remove
the remote Control key
1. Briefly press the button –
2. Pull the remote control

key PoSitionS

In order to reach the following key positions without the engine starting: Do not depress the brake/
clutch pedal.
0 Unlock the car.
i With the remote control key fully inserted into the ignition switch: Briefly press Start/StoP
engine.
ii With the remote control key fully inserted into the ignition switch: Press Start/StoP engine
for about 2 seconds.
Key position ii consumes a lot of current from the battery and should therefore be avoided!
See also the table in the section "Key positions" in the normal owner's manual for the car for
information on the functions/systems that can be used with the engine switched off in different key
positions.
To return to key position 0 from position ii and i: Briefly press Start/StoP engine.
keyleSS* key SyStem
The key can remain in a pocket, for example, the
whole time.
loCk & arm the Car alarm
– Touch the rear section of one of the outer
door handles (see illustration).
unloCk & diSarm the alarm
– Grip a door handle and open the door in the
usual way (a glove may prevent the function).
the engine stops.
key out from the ignition
switch.
BliS – Blind SPot information
SyStem*
If the BLIS indication lamp illuminates despite
no vehicle being in the blind spot, the cause
could be reflection from wet road surface or
low sun shining into the camera for example.
In the event of a direct fault in the system the
display shows the text
vice required.
Start the engine
– Depress the brake/clutch pedal and briefly
press the Start StoP engine button.

SwitCh off the engine

– Briefly press the Start StoP engine
button.
See the owner's manual, section "Locks and
alarm", for more information.
Blind spot syst. Ser-