Hardware Features; Top Panel With Led; Rear Panel - NETGEAR WNCE3001 User Manual

Hardware Features

Top Panel with LED

The WNCE3001 has one LED, which indicates the power and wireless connection status.
Top panel

Rear Panel

USB port
Figure 2. Rear panel
Universal Dual Band WiFi Internet Adapter (WNCE3001)
LED status Activity
Off Unit is not powered on.
Solid red Link quality is poor, based on the link rate, or the USB does not
supply enough power.
Blinking red If the LED blinks red at the rate of 0.5 seconds on, 0.5 seconds
off, the firmware is corrupt.
Solid amber Link quality is fair, based on the link rate.
Blinking amber System is booting up, or has been reset. The LED starts to blink
amber after the Reset button has been pressed for more than 5
seconds. The LED also blinks amber during a firmware upgrade.
Solid green Unit is powered on, and the link quality is good, based on the link
rate.
Blinking green Boot-up is complete, but no wireless connection is established,
so no IP address is obtained.
Ethernet port
Getting Started
Reset
WPS
button
button
5