System Menu - Clarion FB278RBT Owner's Manual

Common Operations
Editing a device name
1. Select "EDIT DEV.".
2. Turn the [
device name to be edited.
3. Push the [
∗ The display shows the device name.
4. Turn the [
acter.
5. Press the [ ] button or push [
knob to go to next character. Press the [
button to return to previous character.
6. Push the [
character to store the name.
Notes:
Push and hold the [
seconds or longer at any position will store the
name as well.
If there is no device connected, " ( no devices ) " will
be shown in the display.
Deleting a device
1. Select "DEL. DEV.".
2. Turn the [
to be deleted.
3. Push the [
firmation is prompted.
4. Turn the [
or "NO".
5. Push the [
selection.
Notes:
If there is no device connected, " ( no devices ) " will
be shown in the display.
"All" option will be available if there is more than
one device connected.
Deleting pairing information in the main unit only
stops the unit from being connect to the other de-
vice. It does not stop the other device from trying
to connect to main unit. Please delete the pairing
information of the main unit from the phone/device
as well. Always make sure pairing information on
both device and main unit have been deleted before
starting a new pairing activity.
Deleting a device will disconnect any current
Bluetooth connection. User will need to manually
®
re-connect if necessary.
] knob to select a
] knob.
] knob to edit a char-
]
]
] knob at the last blank
] knob for 1.5
] knob to select a device
] knob. A delete con-
] knob to select "YES"
] knob to confirm the
Automatic connection
This function allows the unit to be connected au-
tomatically with previously connected device dur-
ing power up or entering Telephone mode. The
Bluetooth
wireless function in your phone has to
®
be turned on to establish automatic connection.
1. Select "AUTO CONN".
2. Turn the [
or "OFF".
ON : Auto connection enabled.
OFF : Auto connection disabled.
Notes:
The factory default setting is "OFF".
Please enable this feature only if your phone is
supported.
Selecting microphone input
1. Select "MIC".
2. Turn the [
the following:
INTERNAL : Built-in microphone will be used.
EXTERNAL : An external microphone will be
used.
Note:
The factory default setting is "INTERNAL".

System Menu

1. Press and hold [ ] and [
multaneously for 1.5 seconds or longer.
2. Press the [ ] button to select an item.
,
"VERSION" "FACT. RST"
3. Press the [ ] button to exit the menu.
Checking the unit version
2-1. Select "VERSION".
] knob to select "ON"
] knob to select one of
] buttons si-
29
FB278RBT