Chapter 09
Using MDC
Multi Control
MENU
m : T
Multi Control
ENTER
Multi Control
Multi Control
ID Setup
:
00
ID Input
:
--
MDC Connection
:
RJ45 MDC
Network Setting
Move
Enter
- The displayed image may differ depending on the model.
Return
ID Setup
•
Assigns distinctive IDs to the SET.
ID Input
•
Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds
to the transmitter setting becomes activated.
MDC Connection
•
Selects a port to receive the MDC inputs from.
―
RS232C
MDC: Communicates with the MDC via a
―
RJ45
MDC: Communicates with the MDC via an
Network Setting
•
IP Setting
: Manual,
Auto
IP Address
: Manually enter the
IP Address
Subnet Mask
: Manually enter the
Subnet Mask
Gateway
: Manually enter the
Gateway
if
RS232C MDC
cable.
RJ45 MDC
cable.
if
IP Setting
is set to Manual.
if
IP Setting
is set to Manual.
IP Setting
is set to Manual.
99