Duct Cover Accessories; Product Clearances - GE ZV421 Installation Instructions Manual

DUCT COVER ACCESSORIES

ZV42I
* 9" for ceiling heights 7'11" to 8'5" using the supplied
support frame and duct cover.
Order ZX42DC10 for ceiling heights of 8"6" to 10'4".
ZV54I
* 5" for ceiling heights 7'11" to 8'5" using the supplied
support frame and duct cover.
Order ZX54DC10 for ceiling heights of 8"6" to 10'4".
These accessories include telescoping support
frames and decorative covers. Order the accessory
for your model at the same time as the vent hood and
have on site before installation begins.
Design Information
*Height
to Ceiling
I
20" For ZV42
I
24" For ZV54
4

PRODUCT CLEARANCES

30" Min.
36" Max.
36" Min.
These vent hoods must be installed 30" min. to 36" max.
above the cooking surface. Exact installation height is
determined by ceiling height. The cooking surface
should be at least 36" above the floor.
IMPORTANT: Clearances may vary due to type of
cooking product and local codes. Check with local
inspectors to be sure standard is applicable.
• When installing these Island Hoods above a
Monogram Professional Range or Cooktop,
installation clearance must be at least 30".