D-Link DFL-260E User Manual page 19

1.1. Features
ZoneDefense
IPv6
NetDefendOS Documentation
Reading through the available documentation carefully will ensure getting the most out of the
NetDefendOS product. In addition to this document, the reader should also be aware of the
companion reference guides:
• The CLI Reference Guide which details all NetDefendOS CLI commands.
• The NetDefendOS Log Reference Guide which details all NetDefendOS log event messages.
Together, these documents form the essential reference material for NetDefendOS operation.
provides detailed event and logging capabilities plus support
for monitoring through SNMP. More detailed information
about this topic can be found in Chapter 2, Management and
Maintenance.
NetDefendOS can be used to control D-Link switches using
the ZoneDefense feature. This allows NetDefendOS to isolate
portions of a network that contain hosts that are the source of
undesirable network traffic.
Note
NetDefendOS ZoneDefense is only available on
certain D-Link NetDefend product models.
IPv6 addresses are supported on interfaces and within
rulesets. This feature is not enabled by default and must be
explicitly enables on an Ethernet interface. More information
about this topic can be found in Section 3.2, "IPv6 Support".
19
Chapter 1. NetDefendOS Overview