Playable Discs - Sanyo DC-TS780 Instruction Manual

The following types of discs can be played on this unit.
Disc type and logo mark
DVD Video
Audio CD
Region number
Region number (Regional restriction code) is built-in to the unit and DVD
discs.
There is a region number on the rear of the unit.
The same region number or region number "ALL" of DVD discs can be
used on this unit.
DVD disc
There are the marks on some DVD disc packages.
Example:
Multiple languages
Multi-language subtitles
Multi-angle
DVD discs are divided into titles, and the titles are sub-divided into
chapters.
Title 1
Chapter 1 Chapter 2
Video CD/Audio CD disc
Video CD/Audio CD discs are divided into tracks.
Track 1 Track 2

PLAYABLE DISCS

Multi-aspect
Region number
Closed caption
Title 2
Chapter 1 Chapter 2 Chapter 3
Track 3 Track 4
Note:
- Only the above types of discs can be played on this unit.
DVD-Audio, DVD-ROM, DVD-RAM, DVD-RW (VR mode), CD-ROM,
CVD, SACD, etc. cannot be played.
- This unit can play back Video CDs (VCD).
- Some DVD-R, DVD-RW (Video mode), DVD+R, DVD+RW and
SVCD discs can be played.
- This unit is to be used exclusively with the PAL (or NTSC) colour
system discs. SECAM system discs cannot be used with this unit.
- For DVD discs: The video output signal format can be selected ("PAL
60" or "NTSC") when playing back the NTSC discs.
- For MP3 CD, please see Page 22.
- For Picture/JPEG CD, please see Page 23.
Notes on handling discs
- Do not expose the disc to direct sunlight, high humidity or high
temperatures for extended periods of time.
- Discs should be returned to their cases after use.
- Do not apply paper or write anything on the disc surface.
- Handle the disc by its edge. Do not touch the playing surface (glossy
side).
- Fingerprints and dust should be carefully wiped off the playing surface
of the disc with a soft cloth.
Wipe in a straight motion from the centre to the outside of the disc.
- Never use chemicals such as record cleaning sprays, antistatic
sprays or fluids, benzene or thinner to clean discs.
Track 5
12