Midi Control - Rivera Knucklehead Reverb KR 55T Owner's Manual

MIDI Control

Overview
The Rivera Knucklehead Amp has a MIDI interface, and many functions can be MIDI
controlled.
The amp responds to MIDI Program Change Commands only.
It can be controlled by the Rivera Head Master foot operated MIDI controller or by any
standard MIDI controller.
You must, however, choose one or the other. The amp cannot be controlled by two
controllers at one time.
What Is Midi Controlled?
Channel 1 Select
Channel 2 Select
Channel 3 Select
Boost 1 ON-OFF
Boost 2 ON-OFF
Boost 3 ON-OFF
Reverb ON-OFF
Effects Loop ON-OFF
What Is Not Midi Controlled?
Pretty much everything else including:
The positions of ALL rotary controls, Volume, Bass, Mid, Treble etc.
The Push-Pull switches, Bright, Notch etc.
Combinations And Separate Functions
Two types of commands are provided - Combinations and Separate Functions.
Combinations
When the amp receives a Combination Command, ALL MIDI controllable values are
changed.
For example Program Change 43 selects:
Channel 2
Boost 1 OFF
Boost 2 ON
Boost 3 OFF
Reverb ON
Effects Loop OFF
Separate Functions
Program Change commands for separate functions have also been defined.
Separate functions change ONE value only, leaving all others unchanged.
Knucklehead Reverb 1.0 p 21