Mains Input - Rivera Knucklehead Reverb KR 55T Owner's Manual

Mains Input

Your Knucklehead Reverb has a detachable power cord that connects to the chassis
AC connector labeled Mains Input. Always use this cord and, in the event that the
power cord requires replacement, replace it with the same type of power cord. Consult
your RIVERA dealer for further information. Be sure to use a grounded electrical mains
power supply socket whenever possible. These outlets have a grounding pin in addition
to the normal line and neutral pin. The power cord supplied with your Knucklehead
Reverb has a 3-pin plug. Do not cut off or damage the ground pin. If the available
electrical outlet is of the older 2-pin type, use a suitable ground-lift adapter.
The U.S.A., Canada, and Japan share a common CSA/UL-style cord. Most of Europe
and Scandinavia utilize a Euro plug and have a SEMKO/VDE-style cord. Australia uses
a different type of plug, as does England, and South Africa as well.
Note: Avoid using long power extension cords. Long cords have
sufficient resistance to electrical current that the voltage arriving at your
amp can be significantly reduced. This can have a bad effect on your
tone.
Knucklehead Reverb 1.0 p 20