Advertisement
B
PRIMECENTER Rack
Sliding rail
1-hand-mounting
RMK - 1 pair consisting of
- carrier length variable
toolless mounting possible
included in base unit
S26361-F4530-E12
Mounting 2U server in
asymmetrical racks
with 2U support bracket
SNP:SY-F1647E301-P
Installation ex works for one
server or subsystem.
Hereby the rack will be delivered
completely pre-mounted and
all wired connections are tested.
With PCR S2 12U, 24U, 38U and
PRC M1 16U, 24U, 42U:
Systems and components
will be delivered installed in the rack
With PCR S2 racks 46U:
Systems and components
will be delivered separately
To be ordered only together with
a PRIMECENTER rack
PCR S2 e.g. S26361-K826-V10x
new PCR M1 e.g. S26361-K827-Vxxx
refer PCR S2 or M1 rack configurator
max. 1x per System
S26361-F1452-E100
REGION KIT EMEA AP
For Shipments to EMEA / Asia and
Pacific regions
1x per system
Power cord options (1x per PSU)
T26139-Y1968-E100
Powercord for rack, 4m, grey,
IEC 320 C14 connector
2x
T26139-Y1742-E10
USA, Canada, 1.8m, grey
T26139-Y3850-E10
Option "no powercord", for Countries without
specific cable orderable like e.g. China
C
S26361-F4530-E10
Mounting in
symmetrical & 3rd party racks
(no support bracket needed)
PRIMERGY Classic 19" rack is not supported
S26361-F1452-E110
REGION KIT JP
For Shipments to Japan regions
1x per system
Power cord has to be ordered separately
Fujitsu Technology Solutions x86 PRIMERGY Serve
System configurator and order-information guide
PRIMERGY CX420 S1 / CX272 S1
S26361-F4530-L12
Adapter angle PC/DC-Rack, till 50Kg
necessary for mounting RMKs in
asymmetrical racks
"Rack-mounting ex factory"
This service is to be ordered once
per installable server/storage
subsystem, in order to get the
server/storage subsystem
mounted into the racks.
In case of the 46 U PCR S2
this service has to be ordered,
to get the mounting kits and the
cables installed.
Status 2013-12-30
8 of 21
Advertisement
