Download Print this page

Before You Begin; What Is Included; Unpacking Instructions; Safety Instructions - Chauvet Mini Strobe Led User Manual

Hide thumbs Also See for Mini Strobe Led:

Advertisement

1. B
EFORE

What is Included

·
1 x Mini Strobe LED
·
1 x Warranty Card

Unpacking Instructions

Immediately upon receiving a fixture, carefully unpack the carton, check the contents to
ensure that all parts are present, and have been received in good condition. Notify the
shipper immediately and retain packing material for inspection if any parts appear damaged
from shipping or the carton itself shows signs of mishandling. Save the carton and all
packing materials. In the event that a fixture must be returned to the factory, it is important
that the fixture be returned in the original factory box and packing.

Safety Instructions

·
·
·
·
·
·
·
·
·
·
·
There are no user serviceable parts inside the unit. Do not open the housing or
attempt any repairs yourself. In the unlikely event your unit may require service,
please contact CHAUVET® at: 954-577-4455.
Mini Strobe LED User Manual
Y
B
OU
EGIN
Please read these instructions carefully, which includes important
information about the installation, usage and maintenance of this product.
Please keep this User Manual for future consultation. If you sell the unit to
another user, be sure that they also receive this instruction booklet.
Always make sure that you are connecting to the proper voltage, and that the line
voltage you are connecting to is not higher than that stated on the decal or rear
panel of the fixture.
The unit must be installed in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces. Be sure that no ventilation slots are blocked.
Always disconnect from power source before servicing or replacing lamp or fuse
and be sure to replace with same lamp source.
Secure fixture to fastening device using a safety chain. Never carry the fixture
solely by its head. Use its carrying handles.
Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at
temperatures higher than this.
In the event of a serious operating problem, stop using the unit immediately.
Never try to repair the unit by yourself. Repairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authorized
technical assistance center.
Never connect the device to a dimmer pack.
Make sure the power cord is never crimped or damaged.
Never disconnect the power cord by pulling or tugging on the cord.
Avoid direct eye exposure to the light source while it is on.
·
1 x User Manual
3
Rev. 3

Advertisement

loading