Save & Exit - Foxconn H61MXP Series User Manual

Save & Exit
Main F-Center
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Boot Override
► Save Changes and Reset
If you select this option and press <Enter>, a message will be displayed in the screen. Select
[Yes] to save your changes and reset computer, select [No] or <ESC> to return to the main
menu.
► Discard Changes and Reset
If you select this option and press <Enter>, a message will be displayed in the screen.
Select [Yes] to exit setup utility and reset computer without saving your modifications, select
[No] or <ESC> to return to the main menu.
► Restore Defaults
Optimal defaults are the best settings of this motherboard. Always load the Optimal defaults
after updating the BIOS or after clearing the CMOS values. Select this option and press
Enter, it will pop out a dialogue box to let you load the defaults. Select <Yes> and then press
<Enter> to load the defaults. Select <No> and press <Enter>, it will not load.
By this default, BIOS have set the optimal performance parameters of system to improve
the performances of system components. But if the optimal performance parameters to be
set cannot be supported by your hardware devices (for example, too many expansion cards
were installed), the system might fail to work.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced Boot Power Health
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Security Save & Exit
Save & Exit
Reset system setup after saving
the changes.
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
BIOS SETUP
39