Super Io Configuration; Serial Port - Foxconn H61MX Series User Manual

Super IO Configuration

Super IO Configuration
Super IO Chip
▶ Serial Port 1 Configuration
▶ Parallel Port Configuration
▶ CIR Controller Configuration
► Serial Port 0 Configuration
Press <Enter> to go to its submenu.
Serial Port 0 Configuration

► Serial Port

This item is used to enable or disable the serial port (COM).
► Device Settings
This item shows the resource assigned to the serial port.
► Change Settings
This item is used to select an optimal settings for the serial port.
► Device Mode
This item is used to change the serial port mode.
Parallel Port Configuration
► Parallel Port
This item is used to enable or disable the parallel port.
► Device Settings
This item shows the resource assigned to the parallel port.
► Change Settings
This item is used to select an optimal settings for Super IO device.
► Device Mode
This item is used to change the parallel port mode.
CIR Controller Configuration
► CIR Controller
This item is used to enable or disable the CIR Controller.
► Change Settings
This item is used to select an optimal settings for Super IO device.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
IT8728
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Set Parameters of Serial Port
0 (COMA)
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
35