bIoS Security features
Security Settings
Supervisor Password : Not Installed
User Password
Change Supervisor Password
► Change Supervisor Password
This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to input
user password optionally.
If you have installed the Supervisor Password, the following items will appear:
load optimal Defaults
Optimal defaults are the best settings of this motherboard. Always load
the Optimal defaults after updating the BIOS or after clearing the CMOS
values.
Select this option and press Enter, it will pop out a dialogue box to let
you load the defaults. Select <OK> and then press <Enter> to load the
defaults. Select <Cancel> and press <Enter>, it will not load.
By this default, BIOS have set the optimal performance parameters of system to improve the
performances of system components. But if the optimal performance parameters to be set cannot
be supported by your hardware devices (for example, too many expansion cards were installed),
the system might fail to work.
Save Changes and Exit
When you select this option and press <Enter>, a message
will be displayed in the center of the screen:
Select [OK] to save your changes to CMOS and exit the pro-
gram, select [Cancel] or <ESC> to return to the main menu.
Discard Changes and Exit
If you select this option and press <Enter>, the following message
will be displayed in the center of the screen:
Select [OK] to exit CMOS without saving your modifications,
select [Cancel] or <ESC> to return to the main menu.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
BIOS Security Features
: Not Installed
↑↓←→:Move Enter:Select
F1:General Help
Help Item
Install or change the
password.
[Press Enter]
[Press Enter]
+/-/:Value
F10:Save
F9:Optimized Defaults
Save configuration changes and exit setup?
41
ESC:Exit
Enter New Password :
Load Optimal Defaults?
[OK]
[OK]
[Cancel]
[OK]
[Cancel]
[OK]
Discard changes and exit setup?
[OK]
[OK]
[Cancel]