Fox Intelligent Stepping - Foxconn A7GMX-K User Manual

► Smart Power LED (Optional)
Smart Power LED is a feature built on your motherboard to indicate different states during
Power-On Self-Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
Normal
No CPU Fan
No Display
No Memory
Post Error Message
► Smart Boot Menu
When PC starts, it will ask you to press [Del] key to enter setup or press [Esc] key to enter
smart boot menu. If [Disabled] is selected, then pressing [Esc] has no function. This also
prevents user without password trying to get into your computer through smart boot menu.
► Current CPU Speed
This item displays the current CPU speed.
► Current FSB/HTT Speed
This item displays the current Front Side Bus speed.
► Current CPU Multiplier (Appears only when CPU supports)
This item displays the current CPU Ratio.
► Current DRAM Speed
This item displays the current DRAM speed, in dual channels.

Fox Intelligent Stepping

CPU Clock
PCI Express Clock
CPU Multiplier Adjust
Spread Spectrum
↑↓←→:Move Enter:Select
► CPU Clock
This option is used to adjust the CPU clock.
System Status
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Fox Intelligent Stepping
+/-/:Value
F9:Optimized Defaults
Power LED Status
On
Blinking once (blinking 0.5 sec., off 0.5 sec.)
Blinking once (blinking 2 sec., off 2 sec.)
Blinking twice
Blinking thrice
[200] [200]
[100]
[Auto]
[Enabled]
F10:Save ESC:Exit
26
Help Item
F1:General Help