Foxconn A55A Series User Manual page 99

2. Select a RAID array for use (also can refer to section 5-3)
After rebooting your computer, you will see the RAID software prompting you to
press [Ctrl-F].
Press [Ctrl-F] to enter the Option ROM Utility and configure the mirrored RAID array
as described in the 5-3 section. Finally, you can reach this step as depicted.
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
LD No
LD 1
LD 1
[↑] Up
[Enter] View LD
3. Exit Option ROM Utility and restart computer to go to Windows.
4. In Windows, click "Cancel" to skip any "Found New Hardware Wizard".
Use driver CD and click on "AMD RAID Driver" to install the AMD RAID driver. The
RAID driver will be installed only when you select "RAID" in "OnChip SATA Type"
setting. If you do not select RAID, then RAID driver will not be installed.
[ LD View Menu ]
[ Define LD Menu ]
RAID Mode
RAID 1
RAID 0
[ Keys Available ]
[↓] Down [PaUp/PaDn] Switch Page
[Ctrl+V] View Single Disk
Drv Capacity(GB)
2 249.99
2 249.99
[Ctrl+C] Define LD
[ESC] Exit
92
Status
Functional
Functional