Raid Enable In Bios; Select A Raid Array For Use - Foxconn A55A Series User Manual

5-2 RAID enable in bIoS

1. Enter the BIOS setup by pressing <DEL> key when boot up.
2. Select the "Integrated Peripherals" from the "Main menu", then select the
Configuration" menu and press <Enter> to go to the configuration items.
3. Enable RAID function and individual SATA port for hard drive or DVD connection.
4. Press <F10> to save the setting then PC will reboot itself.

5-3 Select a RAID Array for Use

Advanced
SATA Configuration
Onboard SATA Controller [Enabled]
Onboard SATA Mode [RAID]
▶ SATA Port1: Not Present
▶ SATA Port2: Not Present
▶ SATA Port3: Not Present
▶ SATA Port4: Not Present
▶ SATA Port5: Not Present
When BIOS is restarted, it will display a message asking you to press [Ctrl-F] key to
enter the main menu of Option ROM Utility. Press [Ctrl-F], the Main Menu appears.
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
Press 1..4 to Select Option
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.02.1205. Copyright (C) 2011 American Megatrends, Inc.
[ Main Menu ]
View Drive Assignments . . . . . . [ 1 ]
LD View / LD Define Menu . . . . [ 2 ]
Delete LD Menu . . . . . . . . . . . . [ 3 ]
Controller Configuration . . . . . . [ 4 ]
[ Keys Available ]
Onboard SATA Controller
→ ← : Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
75
"IDE
[ESC] Exit