Nikon F100 Instruction Manual page 73

11.Auto Exposure/Flash Exposure Bracketing options (page 57)
Options: AS: Simultaneous activation of Auto Exposure/Flash Exposure
AE: Only Auto Exposure Bracketing activated
Sb: Only Flash Exposure Bracketing activated
At default setting, Auto Exposure and Flash Exposure Bracketing are
activated simultaneously. However, only Auto Exposure or Flash Exposure
Bracketing can be set to be activated.
12.Switching Command Dial operations (pages 48-53)
Options: 0: Disabled (initial setting)
1: Enabled
Unlike the default Command Dial operations, the Sub-Command Dial can be
set to select shutter speed (in Shutter-Priority Auto or Manual exposure
mode) and the Main-Command Dial to select aperture (in Aperture-Priority
Auto or Manual exposure mode).
13.Easy Exposure Compensation (page 56)
Options: 0: Disabled (initial setting)
1: Enabled
When the Easy Exposure Compensation is activated, exposure
compensation can be performed, without pressing the ˚ button, by
simply rotating the Sub-Command Dial (in Programmed Auto or Shutter-
Priority Auto exposure mode) or Main-Command Dial (in Aperture-Priority
Auto or Manual exposure mode).
• If the exposure compensation values are set to change in Custom Setting
menu 2, up/down to ±5 EV in 1/2 or 1 steps can be set.
• If the Command Dial operations are switched in Custom Setting menu 12,
Main- and Sub-Command Dials operate under opposite conditions except
in Programmed Auto exposure mode.
14.Film advance in multiple exposure (page 61)
Options: 0: Single frame shooting (initial setting)
1: Continuous shooting
At default setting, the shutter is released once each time the shutter release
button is fully depressed in multiple exposure (single frame shooting).
However, it can be changed to continuous shooting where the shutter can be
continuously released as long as the shutter release button is fully
depressed.
Bracketing (initial setting)
73